Control and Monitoring

Control and Monitoring consists of a wide variety of electronic and mechanical devices that are available to allow the desired level of system control and monitoring.

All available bulletins are in PDF format and can be viewed using Adobe Acrobat viewer. To download a bulletin, simply click on the appropriate link below. You may need to hold down the Shift key while clicking on a bulletin link. That will automatically open your download window.

DC Timer 14511 (117K) Provides information on the DC Timer, which controls centralized on-board lubrication systems for mobile equipment and assures lubrication at predetermined intervals. Operates on 12 to 32 vdc power. Includes specifications, dimensions, and ordering data.
Solid-State Timer 14521 (470K) Provides information on the Solid-State Timer. Cycle times can be set from 1/2 minute to 32 hours with ON times of 12 seconds to 13 minutes. Operates on 115/230 vac power. Includes specifications, dimensions, and ordering data.
TC-1000 Solid State Timer/Counter 14530 (223K) Schedules lube frequency either on a time or stroke/cycle basis.
LC-1000 Lube System Controller 14540 (271K) Monitors lube system performance and provides alarms. Schedules lube frequency either on a timer or stroke/cycle basis.
Model MH3000 Lube Meter 14630 (1,061K) Provides information on the Model MH3000 lube meter. The meter measures and records the volume of oil delivered to a continuous-flow, centralized system. Includes specifications and ordering data.
Lube Sentinel Monitor 14701 (48K) Provides information on the Lube Sentinel Monitor and available options. The monitor detects a flow slowdown of 5% of the total volume of lubricant passing through the system. Includes specifications, dimensions, and ordering data.
Lube Sentinel II Monitor Operation & Programming 44701 (501K) Provides information on the Lube Sentinel Monitor. The monitor detects slowdown or stoppage of flow in any continuous series progressive system.
WMP III Maxi-Monitor 14750 (309K) Provides information on the microprocessor-based, programmable WMP III Maxi-Monitor. The Maxi-Monitor controls lube schedules on either a time or machine stroke/cycle basis and continuously monitors and displays status of system via LED lights and alpha-numeric LCD (Liquid Crystal Display). Includes specifications, dimensions, and ordering data.
WMP III Maxi-Monitor Installation 14752 (472K) Provides installation, programming, and operation instructions for the WMP III Maxi-Monitor. Also see Bulletin 14750.
Multi-Purpose Controller 14760 (MPC) (83K) The MPC is a micro-processor based monitor/controller capable of controlling two independent systems.
Multi-Purpose Controller (MPC) Installation & Programming 44760 (466K) Provides installation, programming and operation instructions for the MPC (See Bulletin 14760).
Lube Point Oil Monitor 15390 (69K) Provides information on the Lube Point Oil Monitor used to detect and indicate a no flow or intermittent flow condition under operating pressures up to 3,000 psi. Includes specifications, dimensions, and ordering data.
Performance Indicators 15401 (197K) Provides information on performance indicators used to signal a fault. A wide variety of indicators types and pressure levels are available. Includes specifications, dimensions, and ordering data.
Broken Line Indicator 15416 (323K) Provides information on the Broken Line Indicator. The indicator mounts in the divider valve outlet port. A pin is extended to visually indicate line status. If a break or leak occurs in the line, the pin will retract. Includes specifications, dimensions, and ordering data.
Electric/Pneumatic Lube Sentry Valve 15831 (379K) Provides information on the pneumatic/electric Lube Sentry Valve. The Lube Sentry Valve provides automatic warning and shutdown of equipment if oil is not flowing properly. Includes specifications and ordering data.
Electric/Pneumatic Lube Sentry Valve 45425 (453K) Provides information on the pneumatic/electric Lube Sentry Valve operation and service instructions.
Lube-Line Alert 54000 (96K) Provides information on the Lube-Line Alert. Indicates flow or no-flow at any point in the system ahead of the Lube-Line Alert inlet. Includes specifications and ordering data.
Lube Line Alert Installation 45370 (24K) Provides information on the Lube Line Alert. The alert can be used in any lubrication system to indicate low, intermittent, or steady flow. Includes information on operation, installation, and troubleshooting procedures.